Grind, Hone and Polish Soft Stone Without Chemicals

A marble lobby loses its shine along the walking path first. The rest of the floor still reflects the lights, but the traffic lane has gone dull and scratched. StoneFlash pads let your Orbot restore that stone in five steps with water, no polishing powder or crystallizer.

Orbot rates the process at 3 to 5 passes, about 3 to 5 minutes per square meter (roughly 10 square feet), against 10 to 15 minutes with other methods.

The Five StoneFlash Steps

You don't always need all five. Stop at step 3 for a semi-gloss finish. For maintenance, run step 5 alone, or drop to step 4 for light scratches and finish with step 5.

Kit or Single Step?

Choose your machine size, then either the Complete Kit (steps 1 to 5) for a full restoration, or a single step to replace the pad that wears fastest. On most maintenance routes, that's step 5.

Why You'll Love StoneFlash Pads

• Chemical-free restoration, with no powders or crystallizers to buy.

• Faster per square foot, by Orbot's figures, than typical grinding and polishing methods.

• Made for soft stone such as marble, terrazzo and limestone.

• Fits every Orbot, from the 11-inch SLiM to the 17-inch machines.

What StoneFlash Won't Do

Orbot lists soft stones for these pads. Granite and other hard stone are a different job, so ask us before you buy for them. If the tiles themselves sit at different heights, polishing won't level them. That's what the StoneFlash lippage driver and diamond discs are for, on 17-inch machines.

Tell us the stone type and what it looks like now, or call (855) 601-5678, and we'll tell you which steps you need.

StoneFlash Pad Specifications

Downloads

Questions? Call (855) 601-5678 or email support@oneupcleaning.com.