The Carpet Bonnet That Does the Vacuum's Job
An Orbot has no big vacuum motor, so on carpet the pad does the extraction. SuperZorb is that pad. As the head orbits, its cotton and polyester face soaks up the soil your encapsulation cleaner has loosened, and the carpet is left damp instead of soaked.
On hard floors the same pad works as a power mop. Mist the floor lightly, keep the pad close to dry, and it picks up the film a string mop only spreads around.
Which SuperZorb Size Fits Your Orbot?
| Your machine | Choose | Pad size |
|---|---|---|
| Orbot SLiM (11 in) | 11" (SLiM) | Sized for the SLiM, with glide stripes |
| Orbot LiO (14 in) | 14" (LiO) | 16 in across |
| Orbot Vibe, SprayBorg or LiFE (17 in) | 17" (Vibe, SprayBorg, LiFE) | 21 in across |
The 14-inch and 17-inch pads are oversized on purpose. The extra width keeps the machine base off baseboards and walls.
Why You'll Love SuperZorb Pads
50% cotton, 50% polyester absorbs soil and moisture instead of pushing it deeper into the pile.
Fast drying, because the pad pulls the moisture back out as it cleans.
Gentle on carpet fibers, and less abrasive than a scrub brush, according to Orbot.
Washable about 100 times, so the pad cost per square foot is close to nothing.
Glide stripes on the 11-inch pad cut friction, which stretches the SLiM's battery runtime.
How to Use SuperZorb Pads on Carpet
Vacuum first. Pre-spray Environ encapsulation cleaner at 1 oz per gallon for light soil, 2 to 3 oz for medium and 4 oz for heavy. Center the pad under the machine and work in overlapping passes. Swap to a clean pad when it's loaded with soil.
On heavy traffic lanes, agitate first with an AgiClean pad, then come back with SuperZorb to pull the loosened soil out. On a 14-inch or 17-inch machine, Orbot recommends a carpet glider under the pad to cut friction. The SLiM doesn't need one.
Want the bigger picture on when to encapsulate and when to extract? Read our guide to encapsulation carpet cleaning.
How to Wash SuperZorb Pads
Pre-wash new pads before the first job. After cleaning, keep used pads in a sealed plastic bag until you can wash them, or soak them on site in water and carpet detergent so the soil doesn't dry into the fibers. Run a pre-soak cycle with detergent and about 16 oz of bleach, then hang them to dry. Never put them in the dryer.
Not sure which pad your floor needs? Send us your floor type and which Orbot you run, or call (855) 601-5678, and we'll tell you.
SuperZorb Pad Specifications
| Spec | Detail |
|---|---|
| Brand | Orbot |
| Fits | SLiM 11 in, LiO 14 in, Vibe, SprayBorg and LiFE 17 in |
| Quantity | Case of 10 pads |
| Material | 50% cotton, 50% polyester |
| Pad diameter | 16 in (LiO), 21 in (17-inch machines) |
| Use on | Carpet (encapsulation cleaning), hard floors (power mopping) |
| Recommended cleaner | Orbot Environ HP encapsulation cleaner |
| Reuse | About 100 washes, per Orbot |
| Care | Pre-wash before first use; wash with detergent and bleach; hang dry, no dryer |
| Part numbers | SLRSZORB (11 in), HOSSZP14 (14 in), HOSSZP21 (17 in) |
Downloads
Questions? Call (855) 601-5678 or email support@oneupcleaning.com.