Double power point · Works through your Zigbee hub · Tempered glass
The Matzier Zigbee Double Power Point replaces a standard Australian and New Zealand GPO with a tempered glass panel and touch on/off control. It joins your existing Zigbee network through a compatible hub, so each outlet can be switched by touch, in your hub's app or by voice, with built-in power monitoring.
| SKU | ZBWDB-WH05 |
| Power outlets | 2 × Australian/NZ 3-pin, 10A |
| Rated load | 2400W total |
| Controls | 1 touch button per outlet |
| Power monitoring | Yes, via the app |
| Protocol | Zigbee (IEEE 802.15.4), 2.4 GHz |
| Hub required | Yes – SmartThings / Aeotec, Hubitat, Home Assistant (ZHA or Zigbee2MQTT), FIBARO HC3, Smart Life Zigbee gateway |
| Backlight | RGB, colour and brightness adjustable in the app |
| Rated voltage | 110–240V AC, 50/60 Hz |
| Compliance | RCM |
| Faceplate | Tempered glass, Frost White |
| Dimensions (W × H × D) | 120 × 72 × 37 mm |
| Mounting | Flush mount, standard Australian wall box / mounting bracket |
| Warranty | 12 months |
Must be installed by a licensed electrician. Replaces a standard Australian or New Zealand power point and fixes to a standard wall box or mounting bracket with the supplied screws. After installation, pair the device with your Zigbee hub or gateway in the hub's app. A Zigbee hub is required – the device does not connect to WiFi directly.
Zigbee Touch Light Switch 1–4 Gang – Frost White.