4 Gang Zigbee light switch · Works through your Zigbee hub · Tempered glass
The Matzier Zigbee Touch Light Switch 4 Gang replaces a standard Australian and New Zealand light switch with a tempered glass panel and 4 touch buttons. It joins your existing Zigbee network through a compatible hub, so you can switch your lights by touch, in your hub's app or by voice.
| SKU | ZBSW4G-WH02 |
| Gangs | 4 (4 touch buttons) |
| Rated load | 625W per gang resistive; 150W per gang inductive |
| Minimum load | 20W – below this, fit a bypass (one per switch, not per gang) |
| Neutral wire | Required |
| Protocol | Zigbee (IEEE 802.15.4), 2.4 GHz |
| Hub required | Yes – SmartThings / Aeotec, Hubitat, Home Assistant (ZHA or Zigbee2MQTT), FIBARO HC3, Smart Life Zigbee gateway |
| Rated voltage | 110–240V AC, 50/60 Hz |
| Compliance | RCM |
| Faceplate | Tempered glass, Frost White |
| Dimensions (W × H × D) | 120 × 72 × 37 mm |
| Mounting | Flush mount, standard Australian wall box / mounting bracket |
| Warranty | 12 months |
Must be installed by a licensed electrician. Replaces a standard Australian or New Zealand light switch and fixes to a standard wall box or mounting bracket with the supplied screws. A neutral wire is required at the switch. For loads under 20W, fit a bypass. After installation, pair the device with your Zigbee hub or gateway in the hub's app. A Zigbee hub is required – the device does not connect to WiFi directly.
Zigbee Touch Light Switch 1 Gang · 2 Gang · 3 Gang · Zigbee Double Power Point – Frost White.