HIDROLACA
PRODUCT INFORMATION
Acrylic sealant
Area of application
Decoration and protection of continous cementitious pavements, protection of clay and
natural stone floors, as a primer before the application of Estilpur varnishes.
Product
description
Acrylic one-component sealant in water base for the protection and sealing of cementitious pavements. Especially recommended for prior application to Estilpur varnishes. Easy horizontal and vertical application. Excellent wetting support. Excellent infiltration and consolidation, blocking any future efflorescence. Good general resistance to chemical spills. Quick dry
Conservation
Storage into the original package, closed and avoiding direct sunlight. The product has atleast 1 year life. Although it does not have dregs at rest, it is essential to shake the product before their application. Product sensitive to freezing.
Package
1kg | 5kg
Approximate consumption
7 - 8 m2 / l depend absorption support.
Use
Do not apply when there is risk of imminent rain, the minimum temperature application is +
5⁰C . Do not apply to temperatures above 35⁰C as drying can be too fast, forming surface
defects. As a general rule always apply on ready supports and free powder. Although the
product has a dry powder and tact quickly, wait between coats at least 2 hours in summer
and 4 hours in winter although this may seem visually dry. short hair roller or microfiber roller
The subsequent application of varnish will make passed 12 hours in summer and 24 in
winter.
HIDROLACA
Technical Features
Product: Acrylic resin.
Specific weight: 1,017 +/- 0,020 Kg / L
Appearance: bright.
Weight solid: 30% +/- 2%
Combustion point: non-flammable product.
Voc`s: 1,1 g/l
Dry Tact dried: 30 minutes at 20° C and 60% relative humidity.
Interval between coats: Minimum 2 hours at 20° C. Maximum does not have
Cleaning After using the tools should be cleaned immediately with water.
Cautions
Use resistant protective chemicals gloves. Wear safety glasses with side protection (with
frame). Wash hands and / or face before breaks and after to finish work .Avoid contact with
the eyes and skin. Use personal protection clothes. Consult the Safety Technical Datasheet.
Updated coverage reference: Use the estimates in this section in place of earlier coverage figures elsewhere in this description.
Estimated coverage by container
| Container | One coat | Two coats |
|---|---|---|
| 1 kg | 144–179 sq ft | 72–90 sq ft |
| 5 kg | 718–897 sq ft | 359–448 sq ft |
Manufacturer image consumption: approximately 60–75 g/m² per coat (about 5.6–7 g per sq ft per coat).
Two-coat figures cover the same area twice. Estimates are before waste. Actual coverage varies with surface texture, preparation and application thickness. These figures describe this product only; primers, base coats and protective finishes may be required separately.