The advantage of a single-panel lightbox at this width over a multi-unit build comes down to the joins, or the lack of them. When two or three panels are connected side by side, even the best alignment leaves a visible line where the frames meet and a dark strip where the LEDs do not overlap. A single three-metre panel removes that entirely, so the graphic is one continuous image across the full width, lit evenly from edge to edge. For a brand that has invested in high-quality artwork, the seamless finish is the difference between a professional installation and assembled display equipment.
The 120mm premium PVC frame is half as deep again as the standard 80mm aluminium alternatives. That deeper profile houses more LED strips for brighter, more even illumination across the full graphic area. PVC is more rigid, more resistant to the knocks of transport and more durable over years of repeated assembly than aluminium. At three metres wide that rigidity matters more than at smaller widths, because any flex or bow in the frame shows in the graphic surface. The transformers are integrated inside the frame, so there is no bulky power pack behind the stand. Plug in with a UK three-pin plug and the LEDs illuminate immediately.
At three metres this lightbox fills a standard shell scheme back wall as a single unit, with no need to combine panels, align separate units at setup or worry about dark lines between frames. For wider builds the modular system extends the configuration with link leads and additional units. Add 850mm or 1000mm panels alongside the main frame for wider back walls, 90-degree connectors for L-shaped returns and 180-degree connectors for U-shaped builds that wrap the back and sides. One 150W adapter powers up to three LED strips, keeping mains connections minimal.
The graphic itself is included in the price, printed to your artwork on fire retardant backlit material and fitted into the frame channels with a silicone edging that tensions the fabric smoothly across the lit panel. Because the frame outlasts any one campaign, a fresh print can be ordered for it whenever branding changes, and the 5-year guarantee covers the frame, the LEDs and the assembly hardware. At 28kg the whole thing packs down into a wheeled padded bag with foam compartments, with two people recommended to carry and position it on the stand.
What Ships in Your Pack
- 1 x white PVC lightbox frame (120mm profile, numbered sections) with integrated LEDs and transformers
- Custom-printed single-sided backlit SEG graphic, stabilising feet, UK plug, link leads and a wheeled padded bag
Building a Wider or Wrapped Stand?
Add a 1000mm lightbox as an L-shaped side return with 90-degree connectors, or link several panels for a U-shaped build that wraps the back and sides of a larger shell scheme.
Call us on 01279460460 or send us your stand requirements and we will help you configure the right combination.
The Displaysense SS300LED is a 3000mm single-sided LED lightbox, the widest single panel in the premium PVC lightbox range, filling a standard 3-metre shell scheme back wall as one seamless illuminated graphic with no joins. Dimensions 2250mm H x 3000mm W, with a 120mm deep white PVC frame profile. Weight 28kg. Daylight 6500K LEDs give even, edge-to-edge backlighting, the transformers are integrated inside the frame, and custom single-sided backlit SEG printing on fire retardant material is included in the price. The frame is modular, linking to further units for wider, L-shaped or U-shaped builds, and assembles tool-free in around ten minutes. Supplied with a wheeled padded bag and a 5-year guarantee, for indoor use. Also available in 850mm, 1000mm and 2000mm widths, with a matching LED lightbox counter to complete a stand. Displaysense, UK display product specialists since 1978. Free UK mainland delivery.